The Pro card is a high-performance version of the SST DeviceNet PC card and is compatible with all applications written for the DeviceNet family of interface cards. The SST DeviceNet Pro PC Card connects your PC Card （PCMCIA） bus computer to DeviceNet via a 5-pin DeviceNet connector. Applications Many third party software programs support the SST DeviceNet interface card for various applications including: Operator Interface and MMI PC Control Network Configuration, Troubleshooting and Diagnostics I/O Emulation Device Development Features Entire DeviceNet Protocol is executed in hardware UCMMcapable, Group 1, 2, and 3 dynamic explicit connections supported Simultaneous execution of Group 2 Client and Server operation All DeviceNet standard baud rates supported: 125, 250, and 500 Kbaud Full DeviceNet implementation with Change of State and explicit messaging DeviceNet compliance at the card level for I/O scanner and device applications CustomDriver Development SST offers two options for supporting the DeviceNet interface card: SST Common Driver Architecture （CDA） or Memory Mapped Access. The SST CDA significantly reduces software driver development time without compromising any of SST hardware specific features. The CDA supports SST ControlNet, DeviceNet, Modicon and Profibus interface cards. Memory Mapped Access is also available. SST provides an open documented memory map interface with example drivers. Available with the SST DeviceNet Pro PCI Card DeviceNet Network Analyzer and Monitor Diagnostic Software Tools DeviceNet Node Commissioning Tool OPC Server Common Driver Architecture （CDA） Custom driver development software Microsoft Windows 95/98/NT drivers/DLLs Global technical support （24 hours/7 days） drivers. BHardware Specifications Complaint with PC Card specification 2.1 Type II PC Card form factor 256 Kbytes shared RAM（16 Kbytes host interface window） High perform. 40MHz processor with 512 Kbytes RAM, 512 Kbytes Flash Interrupts; none,5 & 12 supported DeviceNet 5-pin DeviceNet Connector DeviceNet compatible network status bicolor indicator Plug and play （Windows 95 & 98） Compatible with CAN specification 2.0 part A Supports CAN data rates up to 1 Mbaud Supports all standard DeviceNet data rates: 125, 250, and 500 Kbaud Multiple cards can be configured in the same computer DeviceNet conformance tested 500 V optically isolated CAN interface Operational temperature: 0 to 50 C Storage temperature: -25 to 70C Power requirements: +5 V +/- 5%400 mA （typical） Connection to non-powered （3 wire） CAN networks with external 12-24 VDC Other Reference Materials Web Site: www.mysst.com/cards/devicenet/dn.asp Affiliations SST is a member of the ODVA （Open DeviceNet Vendor Association） Data Sheets DeviceNet Diagnostic and Configuration Software DeviceNet OPC Server Third Party Driver List Certifications DeviceNet Conformance Tested Ordering Information: 5136-DNP-PCM-ST