阿美特克技術與工業產品推出適用于高性能定位應用的Mae混合步進電機適用于高性能定位應用。 MAE牌混合步進電機被設計用于傳輸寬泛的高性能定位應用的精確開環控制。依照各種標準NEMA框架的三個系列的MAE電機系統，為用戶提供受益于步進技術的理想電力解決方案。 MAE "HY"系列混合步進電機（型號：16,17,23,42）的特點為：轉子慣性低，MAE "HN"系列電機（型號：34）提供低轉子慣性和高扭矩之間可計算的平衡性，MAE "HS"系列電機（型號：17，23和34）則體現高級扭矩特征。 保持力矩（雙極）長度范圍從12 oz（8.7 Ncm） 到2018 oz（1425 Ncm），主要取決于模塊。MAE "HN"和"HS"模塊的低定位轉矩到保持力矩的比率，進一步提供用于微步進要求的平滑操作和良好的定位操作。 阿美特克所有的品牌傳送的步進解決方案為1.8[sup]o[/sup]（每轉200steps），磨孔定子的具體精度和地面定子促進了空氣氣隙的緊密度和最大化性能，同時也是經CE批準的。根據各種需求電機可以提供4，6或是8個的單頭或雙頭軸。適應應用的定制化選擇包括：齒輪箱、編碼器、軸細節和引線連接器組裝、以及其它等等。 阿美特克科技與工業產品是阿美特克有限公司的一部分，阿美特克是全球領先的電子儀器和電子機械設備生產商，所銷售額超過18億美元。更多信息請登錄：http://www.ametektechnicalproducts.com　電話：330-673-3452　傳真：330-677-3306 [FONT=times] original text [/FONT] [font=times] NEW FROM AMETEK TECHNICAL & INDUSTRIAL PRODUCTS: MAE HYBRID STEPPER MOTORS SUITED FOR HIGH-PERFORMANCE POSITIONING APPLICATIONS [/font] [font=times][Color=#708090]Mae hybrid stepper motors suited high performance positioning applications KENT, OH——MAE brand hybrid stepper motors are engineered to deliver accurate open-loop control for a wide range of high-performance positioning applications. Three series of MAE brand motors in various standard NEMA frame sizes provide users with ideal power solutions benefiting from stepper technology. MAE "HY" Series hybrid steppers （Sizes 16, 17, 23, and 42） feature low rotor inertia for maximum possible acceleration; MAE "HN" Series motors （Size 34） offer a calculated balance between low rotor inertia and high torque; and MAE "HS" Series motors （Sizes 17, 23, and 34） exhibit superior torque characteristics. Holding torques （bipolar） ranging from 12 oz-in （8.7 Ncm） to 2018 oz-in （1425 Ncm） can be achieved, depending on model. Low detent torque to holding torque ratios for MAE "HN" and "HS" models further contribute smooth operation and the fine positioning capability required for microstepping. All MAE brand motors deliver step resolutions of 1.8o （200 steps per rev） in full-step mode, incorporate precision-honed stators and ground rotors promoting tight air gap and maximum performance, and are CE approved. Motors can be supplied with 4, 6, or 8 leads and single- or doubled-ended shafts upon request. Customization options to suit applications include gearboxes, encoders, shaft details, and leadwire-connector assemblies, among others. AMETEK Technical and Industrial Products is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices with annual sales of more than $1.8 billion. For more information, contact Shannon Booth, AMETEK Technical & Industrial Products, 627 Lake Street, Kent, OH 44240. Phone: 330-673-3452. Fax: 330-677-3306. Web site: www.ametektechnicalproducts.com[/color][/font]